Manual Gas Solenoid Valves - Normally Open  

The Geca Gas solenoid valves have been designed to be combined with any gas detection system to shut off the main outlet when an emergency situation is detected. This is achieved via a manual reset. These solenoid valves are installed at the gas piping and connected with a gas detector, these are designed to interrupt the gas flow in a dangerous situation. These valves are ATEX approved and are suitable with natural gas, LPG & non-corrosive gases.

Max operating pressure of as 550 mbar as standard. Complies with EN161.

Manual Gas Solenoid Valve Features:

• Manual reset valves designed to work with any gas detection system.
• When connected to a gas detector, these valves are able to interrupt the supply when an emergency situation occurs.
• Suitable for use with natural gas, LPG & non-corrosive gases.
• Atex Approved: Atex - II 3G Ex nA IIC T4 Gc.
• Complies with EN161.
• Normally Open (NO)
• Connections from ½" to DN100.
• Closing time <1 second.
• Working temperature -15°C to +70°C.
• Available as 550 mbar as standard, or 6 bar Pmax to order.
• 230V as standard, 12V available to order.
• X” Connections = Threaded Gas.
• DN Connections= Sliding Aluminium Flange (PN10 – PN16).